-
Clamps type 300 (for all type of pipes)
Type: 300 General Information:
- two screw clamp
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 17mm.
- material: steel, zinic plated
-
Heavy duty clamps type 400 (for all type of pipes)
Type: 310 General Information:
- two screw clamp
- for horizontal and vertical pipe fixing
- CO2 welded nut. Upon request also available with a different size nut or in 45° ankle to help installers with heavy pipes
- material: steel, zinc plated. Upon request also available hot deep galvanized.
-
Industrial clamps type 407 (for all type of pipes)
Type: 320 General Information:
- two identical parts clamp
- for horizontal pipe fixing
- supplied always in pairs without screws and nuts
- material: steel, zinc plated. Upon request also available hot deep galvanized
-
Clamps Type 310 (for PE-Pipes)
-
Clamps type 111 (for copper pipes)
Type: 100 General Information:
- two screw clamp
- horizontal and vertical fixing
- minimum distance between the wall and the pipe 7mm
- material: steel, zinc plated, yellow pacified
-
Stonework rail system Type C
Type: C
- Rail material thickness 2mm.
- Mechanimal fixing rail and anchors for light and medium load slabs.
- Fixing on at least 4 points.
- Rail anchors adjustable in 3 directions.
- Gap between the wall and the cladding 50mm min.-100mm max.
- Easy and fast to install.
- Dry installation, possible even at extreme temperatures.
-
Heavy duty end caps
-
Flat T connector
-
Heavy duty rapid rail slide nut
-
Stonework rail system Type U
Type: U
- Rail material thickness 2,5mm.
- Mechanical fixing rail and anchors for heavy load slabs.
- Fixing on at least 3 points.
- Rail anchors adjustable in 3 directions.
- Gap between the wall and the cladding 70mm min.-460mm max.
- Extensive range of accessories in order to avoid any kind of metal sub-structure for the cladding.
- Easy and fast to install.
- Dry installation, possible even at extreme temperatures.
-
Stonework rail Type C
Type: C
- Light and medium load slabs fixing rail
- For fixing on any kind of material walls
- Fixing on at least 4 points
- Standard length 3 meters
- With continuous perforation on both sides, holes Ø 7 mm
- With continuous perforation on the back of the rail, oval holes 11 x 30 mm
- Perforation pattern for fixing to wall or ceiling
- Distance between the rail and the first hole are always equal
- Made of stainless steel AISI 304 (A2)
- Upon request, also available on stainless steel AISI 316 (A4) or other material
-
Stonework rail Bracket Type RBA
Type: RBA
- Light and medium load slabs fixing bracket
- Single point fixing only with rail R 25.2
- Adjustable in 3 directions in combination with flat head screw
- Micro-adjastment possible wile is loaded in combination with a safe locking placket
- Made of stainless steel AISI 304
- Upon request, also available on stainless steel AISI 316 (A4) or other material
