Rail systems for natural stone cladding

  • Stonework rail system Type C

    Type: C

    • Rail material thickness 2mm.
    • Mechanimal fixing rail and anchors for light and medium load slabs.
    • Fixing on at least 4 points.
    • Rail anchors adjustable in 3 directions.
    • Gap between the wall and the cladding 50mm min.-100mm max.
    • Easy and fast to install.
    • Dry installation, possible even at extreme temperatures.
  • Stonework rail system Type U

    Type: U

    • Rail material thickness 2,5mm.
    • Mechanical fixing rail and anchors for heavy load slabs.
    • Fixing on at least 3 points.
    • Rail anchors adjustable in 3 directions.
    • Gap between the wall and the cladding 70mm min.-460mm max.
    • Extensive range of accessories in order to avoid any kind of metal sub-structure for the cladding.
    • Easy and fast to install.
    • Dry installation, possible even at extreme temperatures.
  • Stonework rail Type C

    Type: C

    • Light and medium load slabs fixing rail
    • For fixing on any kind of material walls
    • Fixing on at least 4 points
    • Standard length 3 meters
    • With continuous perforation on both sides, holes Ø 7 mm
    • With continuous perforation on the back of the rail, oval holes 11 x 30 mm
    • Perforation pattern for fixing to wall or ceiling
    • Distance between the rail and the first hole are always equal
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Stonework rail Bracket Type RBA

    Type: RBA

    • Light and medium load slabs fixing bracket
    • Single point fixing only with rail R 25.2
    • Adjustable in 3 directions in combination with flat head screw
    • Micro-adjastment possible wile is loaded in combination with a safe locking placket
    • Made of stainless steel AISI 304
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Stonework rail Bracket Type RBB

    Type: RBB

    • Light and medium load slabs fixing bracket
    • Single point fixing only with rail R 25.2
    • Adjustable in 3 directions in combination with flat head screw
    • Micro-adjastment possible wile is loaded in combination with a safe locking placket
    • Made of stainless steel AISI 304
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Stonework rail Connector Type RCA

    Type: RCA

    • Inside connector, to make fabrication with rail type C
    • U-shaped for extra stability
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Safe locking placket for rail brackets Type RBA & RBB

    Type: RBA & RBB

    • Used only in combination with brackets RBA & RBB
    • Used as an extra safe locking article, in side screw connection between brackets and rail R 25.2
    • Micro-adjastment advantage, in bracket positioning wile it is loaded
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Parallel slide nut for rail brackets Type RBA & RBB

    Type: RBA & RBB

    • Used only in combination with brackets RBA & RBB
    • Used as a fast and easy solution in connection between the flat head screw and the rail brackets
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Stonework rail Type U

    Type: U

    • Fixing rail for heavy load slabs
    • Possible to used as cladding sub-structure in any kind of buildings, even without an existing wall
    • Fixing on at least 3 points
    • Standard length 3 meters
    • Possible to used also as a solution for large gaps between the wall and the cladding
    • With continuous perforation on the back of the rail, oval holes 14 x 30 mm
    • Perforation pattern for fixing to wall or ceiling
    • Distance between the rail and the first hole are always equal
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material
  • Stonework rail spacer

    • Used as a spacer between the wall or a metal structure and the stonework rail type U
    • Designed for heavy duty loads
    • Suitable for gaps between 40mm to 240mm
    • In combination with stonework rail type U, bracket type RBD and bracket type A is possible to create a distance of 460mm between the wall or metal structure and the cladding
    • Upon request, also available on other dimensions or thickness
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material.
  • Stonework rail Brackets Type RBC and RBD

    Type: RBC and RBD

    • Single point fixing brackets only with rail type U
    • RBC bracket is used as a direct fixing for heavy load tile slabs in combination with flat head screw and pin
    • RBD bracket is used as a support surface to fix on it a standard stonework bracket type A
    • The combination of RBD bracket and type A bracket is an adjustable in 3 directions fixing solution
    • Made of stainless steel AISI (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material.
  • Parallel slide nut for rail brackets Type RBC & RBD

    Type: RBC and RBD

    • Used only in combination with brackets RBC & RBD
    • Used as a fast and easy solution in connection between the screw and the rail brackets
    • Made of stainless steel AISI 304 (A2)
    • Upon request, also available on stainless steel AISI 316 (A4) or other material.