-
Clamps type 300 (for all type of pipes)
Type: 300 General Information:
- two screw clamp
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 17mm.
- material: steel, zinic plated
-
Heavy duty clamps type 400 (for all type of pipes)
Type: 310 General Information:
- two screw clamp
- for horizontal and vertical pipe fixing
- CO2 welded nut. Upon request also available with a different size nut or in 45° ankle to help installers with heavy pipes
- material: steel, zinc plated. Upon request also available hot deep galvanized.
-
Industrial clamps type 407 (for all type of pipes)
Type: 320 General Information:
- two identical parts clamp
- for horizontal pipe fixing
- supplied always in pairs without screws and nuts
- material: steel, zinc plated. Upon request also available hot deep galvanized
-
Clamps Type 310 (for PE-Pipes)
-
Clamps type 111 (for copper pipes)
Type: 100 General Information:
- two screw clamp
- horizontal and vertical fixing
- minimum distance between the wall and the pipe 7mm
- material: steel, zinc plated, yellow pacified
-
Clamps type 121 (for double copper pipes)
-
Clamps type 113 (for PVC pipes)
Type: 240 General Information:
- two screw clamp, suitable for rain-drain and waste-water pipes
- with pre-fixed woodscrew pin to the body of the clamp
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 10mm.
- material: steel, zinc plated
-
Clamps type 113 (for square pipes)
-
Clamps type 113 (for square pipes)
Type: 247 General Information:
- free clamp, suitable for rain-drain square pipes
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 0mm.
- material: steel, pre-galvanized
-
Clamps type 112 (for steel pipes)
Type: 200 General Information:
- two screw clamp, suitable for medium duty steel pipes
- with pre-fixed woodscrew pin to the body of the clamp
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 10mm.
- material: steel, zinc plated
-
Clamps type 122 (for double steel pipes)
Type: 220 General Information:
- one screw clamp, suitable for medium duty steel pipes
- suitable for fixing two pipes at the same point with only one clamp
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 10mm.
- material: steel, pre-galvanized
-
Saddles type 114 (for all type of pipes)
Type: 10 General Information:
- one part saddle, suitable for small pipes
- for horizontal and vertical pipe fixing
- minimum distance between the wall and the pipe 0mm.
- material: steel, pre-galvanized
